Layer 2 SSID

[MuhammadSaad_2]

Dear All

I need urgent support on creating SSID as layer 2.

We have cisco WLC 2504 and 1602i access point. In our network we have in gate for guest.

I want to create one ssid and bind with vlan only. We can not creat interface on WLC b/c of static IP.

Kindly help its urgent...

Thank You

[Leo Laohoo]

You create a dynamic VLAN called Guest.  Give it a valid VLAN, IP address, subnet mask and default gateway.

Create an SSID called GUEST.  Bind that to the Guest Dynamic VLAN.

Your default gateway is the internet router's IP address.

[MuhammadSaad_2]

See the device which gives the IP is the spoofing device so they can not give static IP.

I need only vlan bind with SSID and broadcast.

[Scott Fella]

Muhammad,

The WLC needs a dynamic interface in order to communicate with any vlan/subnet. Without this, there is no communication between the WLC and that vlan/subnet.

Sent from Cisco Technical Support iPhone App