Limit certain vlan user from accessing WLC GUIi

[shawntls82]

Hi,

May I know if there is a way to prevent users on other VLAN to access WLC GUI?

Thanks

Sent from Cisco Technical Support iPhone App

[Stephen Rodriguez]

You would need to put in a CPU ACL to block the subnets you do not want to allow to access the WLC.

Or you could put the ACL at your L3 device.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

[shawntls82]

I see, Ok will try the CPU ACL first

Thanks

[George Stefanick]

If you have 802.1X deployed you can get fancy with radius.

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
__________________________________________________________________________________________
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

[mmangat]

Hello,

Implementing an ACL on you layer 3 device would be good enough to limit certain VLAN user from accessing your WLC GUI.