cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4199
Views
0
Helpful
1
Replies

loading access point image

Maurice Ball
Level 3
Level 3

I'm trying to set a new IOS to boot on my access point.

Could someone please tell me why I continue to get the following error?

such file or directory

Error loading "flash:/ap3g1-k9w7-tar.152-4.JA1"

ap: dir flash

unable to stat flash/: permission denied

ap: dir flash:

Directory of flash:/

2    -rwx  0         <date>               config.txt

3    -rwx  99366     <date>               event.log

4    -rwx  5144      <date>               private-multiple-fs

5    drwx  640       <date>               ap3g1-k9w8-mx.124-23c.JA2

40   -rwx  210       <date>               env_vars

41   -rwx  64        <date>               sensord_CSPRNG1

42   -rwx  64        <date>               sensord_CSPRNG0

44   drwx  1088      <date>               ap3g1-k9w7-mx.152-4.JA1

11   drwx  128       <date>               ap3g1-rcvk9w8-mx

10224640 bytes available (21515264 bytes used)

ap: set BOOT flash:/ap3g1-k9w7-tar.152-4.JA1

ap: boot

Loading "flash:/ap3g1-k9w7-tar.152-4.JA1"...flash:/ap3g1-k9w7-tar.152-4.JA1: no                      

such file or directory

Error loading "flash:/ap3g1-k9w7-tar.152-4.JA1"

Interrupt within 5 seconds to abort boot process.

Boot process terminated.

1 Accepted Solution

Accepted Solutions
1 Reply 1

Sandeep Choudhary
VIP Alumni
VIP Alumni
Review Cisco Networking for a $25 gift card