loading ios image

[vishalpatil86]

hi,

how can i load new ios image to cisco 1242ag series ap which is lwapp.

i want to load the same ios image as before.

[Stephen Rodriguez]

Take a look at this document

http://www.cisco.com/en/US/customer/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

Cheers,
Steve

--

If  this helps you and/or answers  your question please mark the question as "answered" and/or rate it, so  other users can easily find it.

[Andrew Betz]

Hi Vishal,

You can convert a lightweight AP back to autonomous by running through the following steps:

Converting a Lightweight Access Point Back to Autonomous Mode

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp161272

Best,

Drew