06-21-2017 01:19 AM - edited 07-05-2021 07:13 AM
Hello guys,
on our WLC I'm configure Local Switching and now I want to add a radius server. But if i enable Local Switching on a WLAN and i want to connect them so I didnt got an IP. I cant ping the gateway and co.... But if disable Local Switching I got an valid ip and i can work normaly
So I dont know what is wrong. Can some one help me or have the same problem?
Regards,
Matthias N.
06-21-2017 06:26 AM
Hi Matthias N.
Did you create VLAN & DHCP scope for local switching, I think that is the problem.
Regards,
Krishan
06-21-2017 06:41 AM
Hi Krishan,
where we can I find this options?
If we untickt under WLAN's>"WLAN-SSID">Advance>"FlexConnect Local Switching" the DHCP works and I got an IP. But if the Option FlexConnect Local Switching is enable its dont work.
We have an Windows DHCP server and a radius server. And VLAN are configured in our network environment.
Regards,
Matthias
06-21-2017 06:56 AM
AP type? Maybe 1810 or 1815? Trying to use the wired ports? Client
06-21-2017 07:11 AM
The switch port should be trunk and allowed required VLANs.
06-21-2017 07:12 AM
AP management and client VLAN should be different.
06-21-2017 07:42 AM
We have an Virtual WLC. We are using AP "AIR-CAP1702I-E-K9" and AIR-CAP1602E-E-K9
Client and AP VLAN are not the same.
Switch ports is trunk and allowed required VLAN's
If we using local EAP authentication does it work, but if we use the external windows radius server its not work.
In the radius server log I can see that the authentication was accept.
06-23-2017 03:39 AM
Yes, it will work, If you use Flex-connect group.
06-26-2017 12:53 AM
We have already configured all APs in FlexConnect and FlexConnect groups.
06-21-2017 07:10 AM
HI Matthias,
For local switching you have to configure three thing
1- WLAN's>"WLAN-SSID">Advance>"FlexConnect Local Switching.
2 AP mode will be change into FlexConnect
3. create local VLAN which to be use for mapping with SSID in the flex-connect tab in the AP configuration.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide