04-17-2023 06:10 AM
Hi I have lost username Cisco and Password Cisco after a factory reset on AIR-AP-1800S-A-K9, can not access sensor, how to fix it
Solved! Go to Solution.
04-17-2023 06:47 AM - edited 04-17-2023 06:48 AM
try username: sensor, PW:password or original username and password if the reset button was pressed for more than 60 sec
04-18-2023 09:19 AM
Why give it a static, when you can use Mac address reservations. That is a sensor and not an access point, so you need to use option 43 or DNS to discover DNAc.
04-18-2023 10:04 AM
Thank you for reply, actually i am upgrading it for one of our client and they want me to do it manually, they will later use it in their wireless environment, well you have provided the solution, i have made my switch a dhcp sever and my laptop a dhcp client, sensor is also getting POE and IP from server, all good now
04-17-2023 06:42 AM
Can any one help?
04-17-2023 06:47 AM - edited 04-17-2023 06:48 AM
try username: sensor, PW:password or original username and password if the reset button was pressed for more than 60 sec
04-17-2023 07:02 AM
Thank you so much i can access, please one more help, if possible, i manually entered ip address using cli #capwap ap ip address x.x.x.x 255.255.255.0, now i cannot use capwap ap erase command on cli, it shows error, when i use capwap ap, how can i fix, i highly appreciate if you can give me some solution.
04-17-2023 07:35 PM
paste The error
have you tried physical reset ?
04-18-2023 05:36 AM - edited 04-18-2023 05:38 AM
AP#ap-type capwap
IPC socket server not ready for capwapd. Try after few moments, Errno: 2
after upgrading the firmware using capwap ap ip, netmask command, i can not get back to capwap by using ap-type capwap command
04-18-2023 09:04 AM
I have one AIP-AP1800S-A-K9 with version 1.3.3.0, i am trying to give static ip with following command #capwap ap ip x.x.x.x 255.255.255.0 x.x.x.x but due to old version CAPWAS is not enable, is there any other way to give static ip to wired 0 interface, please share.
04-18-2023 09:19 AM
Why give it a static, when you can use Mac address reservations. That is a sensor and not an access point, so you need to use option 43 or DNS to discover DNAc.
04-18-2023 09:28 AM
Does DNA center have free access or can i create a free account on DNA center ? all i have a console adaptor that i am using to upgrade IOS, i have completed 10 sensors, but this one has old version 1.3.3.0 and capwap is disable, thank you for the reply anyway!!!
04-18-2023 09:55 AM
DNA is not free at all. What is the purpose of upgrading these sensors if you don't have DNA? Have you looked at the 1800S install or deployment guide for further reference? Again, if you don't have DNA, I don't know how you would be able to just upgrade and why? You don't need a static, because you can always figure out what ip address the sensor gets from the switch port and trace the Mac back to the DHCP server or even capture the packet from the switch port.
What are you trying to accomplish?
04-18-2023 10:04 AM
Thank you for reply, actually i am upgrading it for one of our client and they want me to do it manually, they will later use it in their wireless environment, well you have provided the solution, i have made my switch a dhcp sever and my laptop a dhcp client, sensor is also getting POE and IP from server, all good now
04-18-2023 10:15 AM
Cool... glad that worked out.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide