Lost Web access on Aironet 1250

[wmeigs888888]

I can no longer open a http or https connection to the AP.

I do have ssh access and I can log in with full privileges.

I was using the Web interface a few days ago and it did something strange during an update.

The display of the web page became corrupted and no longer responded to my input.

I restarted it from an ssh session and I have also power cycled it via the power injector. Neither

method has helped.

What should I do next or what additional info can I provide from an ssh shell that would help?

Physical access is very difficult. It requires a 30' ladder after 10 p.m. So, I would like to avoid that if possible.

[Leo Laohoo]

Reinstall the full IOS can be done remotely.  All you need is Telnet/SSH access and the TAR file.

[Scott Fella]

Well you could always upload the autonomous image back on of you thing the image is corrupt. You would use the archive download-sw /r /o tftp://

If you do a show run, do you have IP http secure-server or IP http server?

Sent from Cisco Technical Support iPhone App

[wmeigs888888]

Thanks, Scott.

I get the following at the end of the list:

no ip http server

ip http authentication aaa

ip http secure-server

ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag

It looks like https is there, but I can't connect.

[SHIBI V DEV]

Once we had same issue, it happens when GUI supporting files are missing from flash,

What we did was erased complete flash and installed new IOS.

[wmeigs888888]

Sounds like I need to install a new image.

I don't have a contract with cisco so I can't download one.

I found a Cisco extended service agreement at cdw's web site, but I'm not clear if that's what I want.

It's a CON-OS-AP1252AG. That gets me 8x5 on-site as well as download access. Seems like a very good deal for $130ish.

[Leo Laohoo]

I found a Cisco extended service agreement at cdw's web site,

LOL.  Scott's one of the more senior wireless guys in CDW.

[Scott Fella]

Haha LEO! But I'm not in sales:)

But yes... You would just need the basic SmartNet to get you access to the downloads for that AP.

Sent from Cisco Technical Support iPhone App