LWAP authorization issues

[jasonmathew1]

Hi,

My conversions from IOS to LWAP have been successful so far but ran into my first issue yesterday. I converted the AP but it never joined my WiSM. Here is the alarm in WCS:

Failed to authorize AP '6fl-ap1' with certificate type 'SSC' on controller '10.170.10.3'. 'AP Authorization entry does not exist in the Controllers AP Authorization List.'

I've manually added the SSC to the WiSM but it's still not working.

Any help is appreciated.

[Leo Laohoo]

Are you using the 1230 AP? If so, you need to re-install the LWAPP image using the Conversion Tool. During the conversion, the Tool would contact the WLC to create the SSC.