cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3967
Views
0
Helpful
1
Replies

Lwapp discovery request rejected

kcarbone214
Community Member

I am getting Discovery request decoding with subnet broadcast and wrong AP IP address as the error on my WLC controller when my AP tries to join. The management interface is on 172.16.0.253 port 1. Port 2 is my other side of the network which is 172.16.1.253. The APs are on 172.16.1.x/24 and have all recived IPs from my dhcp. Port 2 is on the same switch as my APs but they will not join. Any thoughts? 

1 Reply 1

Rasika Nayanajith
VIP Alumni
VIP Alumni

AP join request should go to WLC management IP address. What WLC model you got (2504 ? )

Refer below for the steps involved

https://mrncciew.com/2013/03/17/ap-registration/

HTH

Rasika

*** Pls rate all useful responses ***

Review Cisco Networking for a $25 gift card