12-07-2021 06:25 AM
I'm attempting to enable mDNS on 6 APs. I have enabled on the controller and the SSID, but two of the APs are showing a disabled status. is there some way to force the APs to enable mDNS?
Controller: 3504
Code: 8.10.162.0
APs: 9120
12-07-2021 06:31 AM
- Do you mean the ap is disabled 'completely'. mdns is part of the controller configuration. You may provide screenshot for clarity.
M.
12-07-2021 07:17 AM
12-07-2021 07:27 AM
Just re-read your comment, the APs are enabled, just the mDNS is showing disabled on 2 of the 6 APs
12-07-2021 07:45 AM
- Reboot those ap's , check if that can help.
M.
12-07-2021 07:47 AM
I tried rebooting, didn't change anything. Also tried clearing the config, with no success.
12-07-2021 08:48 AM
- So the 6 ap's are all 9120 ?
M.
12-07-2021 08:59 AM
Of the 6 APs,
3 are 3802s, these are all ENABLED.
the other three, 1 is ENABLED, but the other two are DISABLED
12-07-2021 09:17 AM
- For the time being I don't have anything more specific but always useful is a checkup of the controller-configuration with : https://cway.cisco.com/tools/WirelessAnalyzer/
M.
12-09-2021 11:53 AM
Thank you, i'll try it
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide