06-23-2019 07:59 AM - edited 07-05-2021 10:36 AM
Hi
We are using Meraki MR33 access points. I am unable to ping from one client to another.
Whats the issue? Is it ap problem to some setting on the meraki?
Solved! Go to Solution.
06-23-2019 08:08 AM
Hi
Is the SSID configured to use NAT mode with Meraki DHCP? If yes, this by design that client to client traffic is not allowed by default. You can allow under the Firewall & traffic shaping tab.
If you are Bridge mode you may want to check firewall rules under the Firewall & traffic shaping tab.
06-23-2019 08:08 AM
Hi
Is the SSID configured to use NAT mode with Meraki DHCP? If yes, this by design that client to client traffic is not allowed by default. You can allow under the Firewall & traffic shaping tab.
If you are Bridge mode you may want to check firewall rules under the Firewall & traffic shaping tab.
06-23-2019 08:30 AM
That was it changed to allow and it started pinging.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide