Migration from Local based controller

[nick-davies]

We are currently deploying MR33 into our remote sites , we currently use a fixed Wireless LAN controller at the data centre and tunnel guest SSID clients across MPLS to local Internet breakout via our firewall , our remote site do not have direct internet connectivity how can this be achieved with the Meraki Access Points and Guest SSID , I don't want to use NAT

[BrechtSchamp]

Yes, it's explained here:

https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/SSID_Tunneling_and_Layer_3_Roaming_-_VPN_Concentration_Configuration_Guide#SSID_Configuration

Basically you need to setup your guest SSID to be tunneled back to an MX which will be in your central location (where your controller currently is).

[nick-davies · Accepted solution]

Excellent I suspect that

thanks

[Philip D'Ath]

Note that the MR33's themselves must be able to get to the Meraki cloud via the Internet.