08-18-2015 04:29 PM - edited 07-05-2021 03:48 AM
When looking at the WLC directly, I see 15 Access Points, if I view it from within NCS Prime, I only see 7.
Has anyone experienced this and/or thoughts?
I've re-synced the controller several times. Removed from Prime and re-added. Nothing I have tried has resolved this issue.
08-18-2015 11:17 PM
is WLC and NCS version are compatible ?
Chekc this:
http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
Regards
Don't forget to rate helpful posts
08-19-2015 07:21 AM
Prime version 2.0 and WLC 7.6.130.0 are not compatible. Odd in that it shows any at all. I found that after the post. Again, just odd that it shows any if not compatible.
Thanks.
08-20-2015 03:59 PM
Correct. WLC 7.6 requires atleast PI 2.1. To get all the bug fixes, I would suggest PI 2.2 + 2.2.2 patch which would also support all WLC 7.6 till the latest
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide