04-16-2007 03:39 AM - edited 07-03-2021 01:56 PM
I have an AP that has been upgraded by someone else. The 802.11g interface does not come up, and an error message "*Mar 1 00:03:15.367: %DOT11-2-NO_FIRMWARE: Interface Dot11Radio0, no radio firm
ware file (flash:/c1200-k9w7-mx.123-8.JEA/5501.img) was found" is seen. Any ideas, I suspect the radio module is not correct for this 1230 AP. I have upgrade IOS to latest version.
04-16-2007 05:09 AM
Hi Robert,
I am sure you are on the right track regarding the Radio Module, here is a very similar thread from last December. It seems that the new Radio module (with none of the identifying stickers) may have been intended for the wrong country (A or Japan) Have a look;
Hope this helps! Please let us know your resolution :)
Rob
04-16-2007 06:13 PM
Many thanks,
It would appear that the radio module has been source incorrectly (I suspect not from a cisco partner).
I will have a look at the controller, and post result when I find it.
Many thanks ....Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide