03-10-2016 08:24 AM - edited 07-05-2021 04:45 AM
I'm replacing 5 Cisco 1242 APs with 1852i using Mobility Express. Some of our SSIDs use a 256 bit key (e.g. 64 hex digits) and this is necessary these days in the age of oclHastcat and it's GPU acceleration.
The Mobility express system wants me to enter up to 34 ASCII characters for the WPA2-PSK key and won't accept 64 hex digits.
We haven't had a problem with any device not allowing you to enter a full length key before (even my Kindle Paperwhite is fine with it). If the Express GUI won't let me do it, is there any way to configure it using the serial console?
Any insight appreciated.
Solved! Go to Solution.
03-10-2016 11:01 PM
If security is a concern, why not change to something like WPA2-Enterprise mode, and link it in with a local directory, like Active Directory?
03-10-2016 11:01 PM
If security is a concern, why not change to something like WPA2-Enterprise mode, and link it in with a local directory, like Active Directory?
03-11-2016 06:40 AM
We certainly considered that Philip but we have a less computer literate user community than most and it's felt that there are a lot of very weak domain passwords out there. We also have an SSID that is used for voice only (with Cisco Wifi handsets) and so we have a lot of handsets to reprogram if we can't use a full length WPA key.
I'm really not used to configuring things from a GUI and prefer the command line. I'm wondering if it is possible to program it with the command line?
03-13-2016 01:40 PM
I've never tried with the 1852's. They are very new. I guess you can try doing a telnet/ssh to it and see what happens.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide