Mobility express question

[ittechk4u1]

Hello experts,

I have few question about Mobility express.....

Background: I have two 1832I  models 

1. Do I need to configure both AP with diff IP or One AP will join to another (working as master wlc)automatically ?

2. Both AP is capable of become a ME Controller so How can i stop to one controller to not take part in that process ?

3. How to configure Dynamic interface IP address/mask /Gteway and DHCP via GUI in mobility express ?

Thanks in advance.

[Flavio Miranda]

Hi,

1. Do I need to configure both AP with diff IP or One AP will join to another (working as master wlc)automatically ?

 You need to setup APs independently first. 

2. Both AP is capable of become a ME Controller so How can i stop to one controller to not take part in that process ?

Yes, you can define which one will be the master by running the command "config ap next-preferred-master <Cisco AP>". 

Otherwise, they will start a process to device which one will be the master.

-If I helped you somehow, please, rate it as useful.-