Wireless

hi, i'm always consulted on various cisco AP model on their cell coverage area/distance (AP to client). for example, i've checked 1550 outdoor AP is around 300 m/1000 ft. is there a website or link that gives a list of all cisco APs together with its...

Team -  Is NAT mode supported on  Cisco 1600 AP?

Hello Team,   I am Having 1 qty WLC 2504 LanController with 3 qty 1702i Aironet series AP. We connected 60 Laptop Clients in this Wirelless.Controller version is latest..and configuration is default .. I am getting low internet speed in wireless..! W...

HI, i thinking to buy cisco 881W router for 90-100 users including Wi-Fi and LAN so should we terminate two different ISP (internet) on same router or not?

HiI have issue for H-REAP mode.I have environment with     - AP 1142,    - Two WLC 5508 100 AP version 7.0.98.0 and config enable management Via Wireless    - AP and the WLC in the same lan    - Client Authen PEAPissue: Wireless client connect to AP ...

team, i configured a 2504 lan controller with 5 number 1850 lightweight ap.Problem was that i am getting low coverage.After penitrating a single wall there is a  decrease in 10 dbi..Tpc is set as 1.... 1700 series access point have good coverage  tha...

Hey guysWe upgraded the WLC 8500 from 8.0.110.9 to 8.4.100.0 & after upgradation most of the flexconnect mode access point(AIR-CAP3602I-N-K9) unable to join the WLC.but local mode access point successfully joinedCan anyone suggest why access point un...

Device WLC 2000( with the new IOS AIR-WLC2006-K9-4-0-206-0.aes) and AP 1130.First time when i power on AP1130, WLC is able to detect it and wireless is working fine WLC will automatically upgrade the IOS of 1130AP to c1130-k9w7-tar.123-11.JA1.tarbut ...

I have 1130 seies AP installed quite close to my test laptop machine. I have already connected my laptop to internal WLAN without any issue. The I have another 1130 AP , about 3m away from my laptop. Ass sson as I power on the second AP, I can see my...

Hola, Tengo un portal cautivo configurado en un WLC 2500, la autenticación se hace desde usuarios locales creados en el WLC, pero cada vez que un usuario ingresa al portal para hacer log in esta página muestra "error de certificado". El WLC tiene el ...

HI Expert,   I configured MAB on the switchport which connected to AP(model 3700 and Model 3800), ISE configured as AAA Radius server for authentication. My question as below   1. Switch showed authentication status as Unauth 3750X#show authenticatio...

How can I configure a static ip address and the controller ip address on a cisco ap 3800 series ?  

Hola, Tengo un WLC 2504 versión 8.1.131.0 con configuración 802.1x para la autenticación, pero he notado que los moviles se conectan automaticamente al SSID pero todos los equipos windows no se conectan automaticamente, si no que cada vez que quiero ...

Hello everyone,   I have upgraded from 8.3.102.0 to 8.5.120.0. Everything went fairly good, except that my phones are now unable to obtain IP address... I didn't have much time to troubleshoot but I couldn't spot anything obvious.    In short I have ...