MSE Enhanced WIPS Engine don't show

[ferraro.emiliano]

Hello ,

I'm following this guide

http://www.cisco.com/en/US/docs/wireless/technology/wips/deployment/guide/WiPS_deployment_guide.html

but I can not see

Enhanced WIPS Engine

feature?

I have this licencse

wIPS Local Mode APs

Thanks

Emiliano

[aqjaved]

Cisco wIPS solution offers flexible and  scalable, 24x7x365-based full time wireless security solution to meet  each customer's needs. This document will cover the wIPS security  solutions that are provided as part of Cisco Unified Wireless Solution.  Depending on your deployment, there is a solution to meet your security  needs, starting with the base Wireless LAN Controller (WLC), followed by  the WLC and MSE, and finally the WLC, MSE, and CleanAir enabled access  points.

Please check the below link which can helpful for you in  configuration:

http://www.cisco.com/en/US/docs/wireless/technology/wips/deployment/guide/WiPS_deployment_guide.html#wp57176

[ferraro.emiliano]

I had already written the link that I read is the same. But i haven 't

Enhanced WIPS Engine

[nwittenberg]

Did this ever get answered?

[Ric Beeching]

I think the screenshot above is old or not correct, the APs must be in Monitor mode to get the Enhanced WIPS Engine. Have you tested that?

Cheers,

Ric

[nwittenberg]

I have, it still does not show up are even when I turn the AP into Monitor Mode.