cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
903
Views
0
Helpful
4
Replies

MSE Reachability Status is always unreachable !!

kkaankayaa
Beginner
Beginner

I am using Prime infrastructure 3.1 and MSE's version is 7.4.100.0.

I created network topology and added access point's.Now I can see clients on the list but there is no clients on the site map.

Do you have any idea about problem ?

4 Replies 4

ammahend
VIP
VIP

First thing first ensure compatibility for wireless infrastructure-  look at table 4

http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html#52734

secondly if its compatible, you might want to match the key hash between WLC and MSE and ensure they are synced.

[root@mse ~]# cmdshell

cmd> show server-auth-info

----------------
Server Auth Info
----------------
MAC Address: 00:0c:29:xx:xx.xx
SHA1 Key Hash: 0a92acd20a9ee6b26159d4878d2bdcce7585xxxx
SHA2 Key Hash: b2516e4f014997aaf2d74468788ab308f2ed48da4ca6643ff1bfa84a6eecxxxx
Certificate Type: SSC

(5508-1) >show auth-list

Mac Addr                  Cert Type    Key Hash
-----------------------   ----------   ------------------------------------------
00:0c:29:a8:2d:50         LBS-SSC-SHA256      b2516e4f014997aaf2d74468788ab308f2ed48da4ca6643ff1bfa84a6eecxxxx

Let me know if this helps.

-hope this helps-

Its not working,I checked compability guide everything is ok after that I checked key hash , they matched.

What should I check now ? 

getserverinfo - make sure MSE is running properly

telnet -p 443 from prime to MSE to ensure reacheability

Lastly try "ncs stop"/"nsc start", some bugs with similar issue have workaround with this "CSCuy43823", if still dosen't work, open a TAC case.

-hope this helps-

The problem solved. 

Really thanks!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: