MSE RF Calibration - Failed to initiate data collection

[EvaldasOu]

Hi guys.

As you know, in order to improve Wi-Fi location accuracy, we can apply our RF calibration model. I have a problem here, it is impossible to calibrate.

I'm using:

• WLC 7.6.100.0;
• MSE 7.6.100.0;
• PI-VA-1.4.0.45-small.

I have a client with Intel(R) Centrino(R) Advanced-N 6205 wireless card. This card is CCX capable and here is my client info on WLC:

However, when I go to Cisco Prime infrastructure, create a new RF calibration model, select the floor and click “Next”:

In the new page I see this error (but I already enabled S60 setting on the WLC via CLI):

Ok... let say we click "OK" here. Next, on this page I choose “Collection Method – Point” and click “Go” on the selected Calibration Point. The new error message appears:

So in this situation, I am not able to collect any calibration data in order to improve location accuracy.

Maybe I am missing something? Has anyone of you tested this?

[c.servicos]

I am having the same problem. You CONSEG solven???

[EvaldasOu]

Hi,

I have solved this problem. The problem was incorrect SNMP configuration between WLC and Cisco Prime Infrastructure. Please check Your SNMP configuration.

:)

[c.servicos]

Thank you, now, this working