cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
421
Views
0
Helpful
1
Replies

Multiple VLANs mapped to single SSID on Flex 7500

Sohail Muhammad
Level 1
Level 1

Hi All,

I have to deploy Cisco Flex 7500 WLC with Cisco 1600 series APs at a customer site. There requirement is to map their existing VLANs to only single SSID. They have around 8 VLANs which are created according to the Active Directory Groups for users (Department wise). They require authentication from AD and they are using ISE 1.1 as RADIUS server. Also, customer's branch office APs will also be registered on this Centralised WLC.

Can anyone help me in acheving this goal?

Regards, Sohail

1 Reply 1

Rasika Nayanajith
VIP Alumni
VIP Alumni

You should be able to use AAA-Override feature to give different vlan to each usergroup (based on AD-Grouping) still keeping the same SSID.

I think this feature support in FlexConnect from WLC software 7.2 onwards. See this CiscoLive material (page 47-50) for detail.

HTH

Rasika

**** Pls rate all useful responses ****

Review Cisco Networking for a $25 gift card