12-04-2014 07:28 AM - edited 07-05-2021 02:04 AM
I am deploying a 5508 in one DC and another 5508 in another DC running the HA-SKU license
Does anyone know what ports need to be opened for communication between these two controllers?
Thanks
Roger
12-04-2014 12:13 PM
Hi Roger,
Below gives general port numbers you need to open for intercontroller communication. In your case you need to open UDP 5246 & 5247 as well since AP communicating with the N+1 WLC sits behind firewall.
http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/107458-wga-faq.html#qa7
Also following link should give some additional port information as well
http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/113344-cuwn-ppm.html#t4
HTH
Rasika
*** Pls rate all useful responses ****
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community