I have some problem in implement Nac on wireless lan controller.
- I using ACS version 4.0
- My laptop already install CTA and Aegis secure for authentication.
- Controller I have already did it.
First, time I had tried to authenticate EAP-FAST before do NAC. That working as well but after i apply policy nac on ACS, I cannot authenticate EAP-FAST anymore. Logging show "EAP type do not configure" in ACS server, but I had done to configure it.
So, now i don't have idea to implement it, so, if anyone have some suggestion or some ducument, please help me.
Table of Contents
Table of ContentsOverviewConnecting a Catalyst 9800 WLC to Cisco DNA Center ManuallyConnecting an AireOS WLC to Cisco DNA Center ManuallyCisco DNA Center Assurance Deployment Guide References
The purpose of this document...
Securing devices without 802.1X
PSK (Pre-Shared-Key) WLAN is widely used for consumer & enterprise IoT onboarding as most of IoT device doesn’t support 802.1X. While PSK WLAN provides an easy way to onboard IoT, it also introduces challenges as...
Due to the certificate expiration, any new Control and Provisioning of Wireless Access Points (CAPWAP) or Light Weight Access Point Protocol (LWAPP) connection will fail to establish. The main feature that is affected will be the Acce...
Where to download
Attached files on this post
Alternatively, cloud version (only summaries)
New implementation for the WLC Config Analyzer. it is a new re-write of the application, with clean up and improved checks
Support for IOS...