Need help for configuration of access point c9105 AXI- D

[naveenbarnwal80]

Hi, I need help for configuration of access point C9105 AXI-D

[Flavio Miranda]

@naveenbarnwal80 

 What are you trying to do? Join the AP to a WLC or setup the AP as EWC ? 

[naveenbarnwal80]

I have total 13 nos. of this model.i want to make one as controller and remaining it's secondary.

[Flavio Miranda]

Sounds like a plan. You need to setup two EWC amont those 13 you have. Then, 11 will be only normal AP. One EWC you set as primary, automatically the other EWC will be the secondary. 

 There will tons of guide if you search and very detailed videos on youtube on how to setup EWC.

https://www.cisco.com/c/en/us/support/docs/wireless/embedded-wireless-controller-on-catalyst-access-points/215303-embedded-wireless-controller-conversion.html

You may need to prepare a TFTP server on your PC and add Access Point image on the TFTP directory as the EWC does not provide images to the Access Points.

But, all those details you can find on the guide. Read it carefully and let me know if you stuck at some step.

[MHM Cisco World]

https://www.cisco.com/c/en/us/td/docs/wireless/controller/ewc/17-13/config-guide/ewc_cg_17_13/overview_of_the_controller.html <<- this for EWC

What you meaning secondary can you more elaborate?

MHM

[Rich R]

> What you meaning secondary can you more elaborate?
@MHM Cisco World https://www.cisco.com/c/en/us/td/docs/wireless/controller/ewc/17-13/config-guide/ewc_cg_17_13/m_ewc_high_availability.html

[MHM Cisco World]

I want to clear he want other AP to be standby ??

MHM