cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
418
Views
0
Helpful
1
Replies

Need Help regarding WAP

souravpal
Level 1
Level 1

%CAPWAP-3-ERRORLOG: Not sending discovery request AP does

not have an Ip !!

Getting error in cisco LAP1142 ..

After  adding IP address and controller IP address. its showing another error...

"

Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)

"

Then

*Mar  1 00:13:15.890: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth

ernet0, changed state to up

*Mar  1 00:13:15.890: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth

ernet0, changed state to down

1 Reply 1

Yahya Jaber
Cisco Employee
Cisco Employee

Hi,

what method are you using in order the AP will discover the WLC?

i.e.

%CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip this one for DHCP 43

Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255) this one for DNS

others are normal happens regarding the join.

if you want, you can configure the WLC and the IP statically.

capwap ap ip address ip_address

capwap ap ip default-gateway default_gateway

capwap ap controller ip address ip_address

hope it helps.

Review Cisco Networking for a $25 gift card