NetStumbler 4 and WLC 5.1

[glemaire]

Hello,

I'm currently testing the WLC 2106 updated to 5.1.151.0 and NetStumbler 0.4.0 (http://downloads.netstumbler.com/downloads/netstumblerinstaller_0_4_0.exe)

The WLC don't recognize NetStumbler... Is-there a new signature for this version ?

I have check the "Enable check for all Standard and Custom Signatures".

Thanks in advance.

[Scott Fella]

Signatures come with the code, but can be modified. Just upload the signature to your pc or laptop and add the signature if you know it or maybe Google it and then upload it back to the WLC.

Here is the list:

Name = "NetStumbler 3.2.0", Ver = 0, Preced= 13, FrmType = data, Pattern =

0:0x0108:0x03FF, Pattern = 27:0x00601d:0xFFFFFF, Pattern = 30:0x0001:0xFFFF, Pattern =

36:0x466c7572:0xFFFFFFFF, Freq = 1, Quiet = 300, Action = report, Desc="NetStumbler 3.2.0"

Name = "NetStumbler 3.2.3", Ver = 0, Preced= 14, FrmType = data, Pattern =

0:0x0108:0x03FF, Pattern = 27:0x00601d:0xFFFFFF, Pattern = 30:0x0001:0xFFFF, Pattern =

36:0x416C6C20:0xFFFFFFFF, Freq = 1, Quiet = 600, Action = report, Desc="NetStumbler 3.2.3"

Name = "NetStumbler 3.3.0", Ver = 0, Preced= 15, FrmType = data, Pattern =

0:0x0108:0x03FF, Pattern = 27:0x00601d:0xFFFFFF, Pattern = 30:0x0001:0xFFFF, Pattern =

36:0x20202020:0xFFFFFFFF, Freq = 1, Quiet = 600, Action = report, Desc="NetStumbler 3.3.0"

Name = "NetStumbler generic", Ver = 0, Preced= 16, FrmType = data, Pattern =

0:0x0108:0x03FF, Pattern = 27:0x00601d:0xFFFFFF, Pattern = 30:0x0001:0xFFFF, Freq = 1,

Quiet = 600, Action = report, Desc="NetStumbler"

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008063e5d0.shtml#sign

[glemaire]

I don't found any information concerning the new signature of NetStumbler 4. :o(