04-28-2009 04:02 PM - edited 07-03-2021 05:30 PM
Hi,
I'm trying to config nokia E60 with cisco Callconect with Leap.
In WLC (4.2.172) I have configured in WLAN Profile , WPA+WPA2-> WPA Policy and TKIP -> CCKM.
I'm trying to use Local Eap, i have defined user and password in controller.
In nokia device i only active EAP-LEAP profile and
The Nokia Phone :
-Connection name : VoWLAN
-Databearer : Wireless WAN
-WLAN netw. name: TEST
-Network status: Broadcast
-WLAN netw. mode: Infrastructure
-WLAN security mode: 802.1x
-WLAN security settings :
--WPA mode: EAP
--EAP plug-in settings:
---EAP-LEAP (select only this, put in the higher position and disable all the others) :
---EAP-LEAP Configuration :
----User name: [Local Eap wlc user name]
----Prompt password: No
----Password: [ Local Eap wlc password]
Phone is not assossiating with WLAN, is that configuration supported? I have forgoted something?
Regards
MC
04-28-2009 04:27 PM
Hi MC,
Have you gone through the Cisco Unified Wireless Network Design Guide for Nokia Eseries Phones?
http://www.cisco.com/en/US/docs/wireless/technology/nokia/design/guide/nokia.html
Hope this helps.
04-29-2009 02:10 PM
Hi Leolaohoo,
Thanks a lot,I've been looking for a while for a Design Guide for Nokia phones made by Cisco.
Unfortunetelly didn't solve my problem. My configuration for LEAP is equal to the configuration sugested by the design guide but phone didn't associate. I have only one thing diferent. I don't have External radius server i'm using Local Eap authentication of WLC.
Anyone has more suggestions?
Thanks
Best Regards,
MC
04-29-2009 04:32 PM
Thanks for the ratings, MC.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide