OEAP 1810 implementation

[mcaoile]

Hi Experts,

We have set up 5520 with HA and a 2504 as an anchor controller for guest access.

Do I have to connect the OEAP 1810 on the 5520 or on the anchor controller?

My colleague is suggesting to connect the OEAP in the anchor controller with a public IP NAT to the anchor controller.

Need some advise on how to implement OEAP 1810.

Thks

Manuelito

[Saravanan Lakshmanan]

OEAP generally deployed outside our corp network ie., connection coming from outside to access inside resource. NAT to receive connections from public network and place it in DMZ zone.

OEAP Technical and Deployment reference(some of them not applicable to 1810 specific model):-
https://www.cisco.com/c/en/us/support/docs/wireless/aironet-600-series-officeextend-access-point/113003-office-extend-config-00.html

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-3/b_Cisco_OfficeExtend_Access_Point_/b_Cisco_OfficeExtend_Access_Point__chapter_01000.html