cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
535
Views
0
Helpful
2
Replies

OEAP 602 with 2x Remote LAN Ports

alex.roth
Beginner
Beginner

Hello,

I know the limitations for an OEAP 602 AP with 1 x Remote LAN port:

"Only four clients can connect to an OEAP600 series through a RemoteLAn port".

My question is know if If I´m  using 2  Remote LAN ports can I thne use 4 clients per port or not ?

Thanks for help.

1 Accepted Solution

Accepted Solutions

Hi Alex,

I think client limitation is per Remote LAN. If you want to use two ports as remote-lan you have to assign two different remote LAN for port#3 & port#4.

I haven't test the limit of client in each remote-lan. This post may help you how to configure this dual-remote lan feature on OEAP602

http://mrncciew.com/2013/03/11/oeap-with-multiple-remote-lans/

HTH

Rasika

**** Pls rate all useful responses ****

View solution in original post

2 Replies 2

Hi Alex,

I think client limitation is per Remote LAN. If you want to use two ports as remote-lan you have to assign two different remote LAN for port#3 & port#4.

I haven't test the limit of client in each remote-lan. This post may help you how to configure this dual-remote lan feature on OEAP602

http://mrncciew.com/2013/03/11/oeap-with-multiple-remote-lans/

HTH

Rasika

**** Pls rate all useful responses ****

Hi,

Thanks for your informations.

Regards

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: