cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
820
Views
0
Helpful
1
Replies

Packet dump from 5520 WLC

I'm trying to track down a problem with an 8821 phone, and getting stuck trying to capture packets on the controller. (WLC5520,software version 8.5.140.0). Lightly-edited logs below:

 

 

(Cisco Controller) >debug ap packet-dump enable
(Cisco Controller) >config ap packet-dump ftp serverip --REMOVED-- path --REMOVED-- username --REMOVED-- password --REMOVED--
(Cisco Controller) >config ap packet-dump classifier ip enable
(Cisco Controller) >config ap packet-dump truncate 1500
(Cisco Controller) >config ap packet-dump start 54:86:bc:7e:c2:80
Client Mac Address............................... 54:86:bc:7e:c2:80
FTP Server IP.................................... --REMOVED--
FTP Server Path.................................. --REMOVED--
FTP Server Username.............................. --REMOVED--
Buffer Size for Capture.......................... 2048 KB
Packet Capture Time.............................. 3 Minutes
Packet Truncate Length........................... 1500 Bytes
Packet Capture Classifier........................ IP
Are you sure you want to start capture ? (y/N) y

Request failed!! Invalid input

I'm at a loss, and I've successfully captured traffic from this same controller earlier today! Anyone else ever seen this issue?

 

 

1 Reply 1

HaifengLi
Cisco Employee
Cisco Employee

Please refer the following doc and using Macbook to capture a wireless trace.

 

Wireless Sniffing using a Mac with OS X 10.6 and above

https://community.cisco.com/t5/-/-/ta-p/3120699

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: