cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1090
Views
0
Helpful
2
Replies

Passive Client

u297863AG
Level 1
Level 1

I want to enable Passive Client on the WLAN for a wired client connecting to a non-Cisco Wireless bridge. I'm getting a message saying multicast must be enabled. Can someone help me understand what is the relationship between enabling passive client and multicast?

2 Replies 2

Yes, that is a requirement when enabling passive-client feature.

Refer below for some detail about this

http://mrncciew.com/2013/03/13/passive-clients/

HTH

Rasika

**** Pls rate all useful responses ****

As Ras points out MC is required. His blog does a great job covering it ..

 

Here is also the cisco link on the subject for configuration ..

 

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01100011.html

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________
Review Cisco Networking for a $25 gift card