Greetings to all!
Please help in finding a solution to my problem.
In our company, we have set up a bunch of WLCv + ISE.We have 5 access points. We have single SSID WPA2-Enterprise. ISE checks the user credentials received protocol PEAP or EAP-TLS to belong to certain groups, and depending on the group applies the user cisco-av-pair = role = name_role. On the controller, depending on the role the policy applies which is set VLAN number.
Up to this point are satisfied but there is a task to configure the use of per-user rate limit is different from the common WLAN settings. For exampl, for a single user depend his personal profile used Bandwidth_limit and for each else - other profile. I have tried different variations:
1. indicate limits on local policies;
2. specifies limits on QoS profile;
3. indicates the limits options QoS in WLAN configuration;
I saw resalt only in general restriction in the WLAN settings for all BSS members.
Please explain how the limitation of bandwidth per-user, and also how can i apply for different users different QoS policies (silver / platinum / gold / bronze) to receive traffic pioritezatsiyu some users towards others. If it can be so.
