Please, a 802.11ax beacon from Meraki MR45.

[ecarbajo]

Hello, we have detected some incompatibilities with some Wifi devices or USB wifi adapters, with Wifi6.
Some of then don't see the SSID, they don't recognize the beacons. In some case it has been solved upgrading the driver version of the adapter.

I haven't now in my lab a Meraki MR45, I will like to test it.

Could someone upload a beacon in pcap format, in both bands 2.4 and 5 Ghz captured from a MR45?

Here I have found a beacon from a Catalyst 9100:
https://mrncciew.com/2019/07/23/wifi6-with-cisco-9100-series-ap/

In the lab, I simulate the Wifi6 AP using the "AirPcapReplay" utility with AirPcap Nx adapter.

[Philip D'Ath]

Here is a 60s capture from the Cisco Meraki MR45 itself.

[ecarbajo]

Thank you Philip.

In your capture, there's  wifi 6 beacons from this AP:

Transmitter address: CiscoMer_2d:db:7c (68:3a:1e:2d:db:7c)

They are in channel 1 ,  I would like to have some one in 5 Ghz.  I'm going to have access to the Meraki organization of my customer, and I will try to capture  ( better using filter "subtype beacon" ) .

Then, I'm looking how to convert from pcap  "Prism" format that user Meraki,   to  "radiotap" format that use the Replay application I have.

Regards,