Wireless

ciao a tutti!devo installare il nuovo firmware sull'access point AIR-CAP2702I-E-K9.Qualcuno mi sa guidare in questo processo?Grazie in anticipo hello everyone!I need to install the new firmware on the access point AIR-CAP2702I-E-K9.Can anyone guide m...

Hi, Can we use CCKM authentication with 802.1x layer 2 authentication method. I read it one cisco article that we can't use CCKM with 802.1x authentication.  Please find the url below, its says that is you choose layer 2 authentication method is 802....

Good Day, Having an issue with Windows 11 laptop(s) trying to connect to the Guest portal:  1. Attempt to navigate to the 2.2.2.2/logon page from Edge <unsuccessful>2. Attempt to navigate to the 2.2.2.2/logon page from Edge <unsuccessful>3. Add 2.2.2...

Hi,We have installed Cisco RV340W dual WAN Wireless-AC VPN Router in our office but since it start day the wifi freeze in few days regularly. Previously we thought it was due to update but even after disabling the update and firewall the error persis...

Hi comunnity,I'm facing some connectivity issues when trying to connect iPhone 6 running any iOS 12.4.x release.They all get stuck after receiving 4-way handshake M1 and after many retries, the controlelr delete the session. See below RA output:{wncd...

some of ap will re-jion my ACmy AC logs: Time: Oct 15 14:03:41Facility: local0Priority: emergTag: BHKJ_WLCMessage: *broffu_SocketReceive: Oct 15 14:05:55.051: %BROFFU-0-DP_PACKET_WQE_DIFF: broffu_fp_dapi_cmd.c:6348 Warning: DP Packet pool and WQE poo...

Hi,I´d like to as a Design-related question regarding the general positioning of a Wireless LAN Controller- and ISE NAC appliance in a network!Would it be necessary/useful to secure respectivly the Wireless LAN Controller and/or the ISE from the rest...

Hi, I am trying to configure  a vlan group with 2 vlans (10-11) for ssid on 5760 controller. I can't see client  is taking  ip address from the second vlan . it always get the ip address from the  vlan 10 I thought it randomly get ip  addresses from ...

iseHello Team.We have C9800 with Wave 2 AP in flex mode.We are trying to implement SGACL enforsment for local switched traffic.  I see SXP connection with ISE. But SGACL enforsment doest work.  But in C9800 GUI in AP page, trustsec tab i see that  (s...

Hi, I'm looking for guidance in building out a solution for a portable wireless network for tactical use. FIPS 140-2 compliant60-120 users with 500ft signal rangeOperate in -20F to 150F temperaturesInclude physical cat5 ports I don't have much networ...

"Wireless not working, please fix" is the highest level of information you get when a user report an issue? Dealing with Wi-Fi support ticket is a recurring nightmare? Did you just came back from your lunch break and your inbox is full of users messa...