Please how to reset password for AIR-CAP3702E-E-K9 ?

[Tomas82]

i try pressing mode button and reconnect but password recovery menu via console dont run

[Ric Beeching]

Just confirming you are doing the following:

1. Power off
2. Holding mode button, power AP on
3. Continue holding for ~20 seconds until LED turns solid red
4. Release mode button
5. Power cycle once more as normal and wait for boot
6. Login with Cisco/Cisco

[Tomas82]

led flashing red but ip adress not work my home ip is 192.168.1.1 and copy from console is 

DEAdeLT_ROUTER=192.168.1.1
DEFAULT_ROUTER=10.0.0.1
ENABLE_BREAK=yes
IP_ADDR=10.0.0.1
IP_addr=192.168.1.22
MANUAL_BOOT=no
NETMASK=255.255.255.224
RELOAD_REASON=41
TERMLINES=0
ip=192.168.1.22
ip_addr=192.168.1.22
netmask=255.255.255.0

[Ric Beeching]

Ohh you're stuck in rommon mode now. The AP has an IOS right? If you power cycle will it boot into the proper IOS?

Ric

[Tomas82]

Good day ,
I bought the AP for home. 
AP is used and I do not know my name or my password and it's either in autonomous or lightweight.
 would you ask me to help?
 I took console cable.

[Ric Beeching]

Right can you do a flash_init and a dir flash: to see if there is an IOS on there? If not you'll need to get one from Cisco if you have support or err.. find one if you don't. You want one of these images:

https://software.cisco.com/download/release.html?mdfid=285029865&softwareid=284180979&release=15.2.4-JB3a&flowid=48542

Ric

[Tomas82]

%Error opening tftp://255.255.255.255/ap3g2-k9w7-tar.default (connection timed out)ap: flash_init
Initializing Flash...
...The flash is already initialized.
ap: dir flash
unable to stat flash/: permission denied
ap: dir

List of filesystems currently registered:

flash[0]: (read-write)
xmodem[1]: (read-only)
null[2]: (read-write)
tftp[5]: (read-only)

ap: unable to stat flash/: permission denied
ap:

[Tomas82]

IOS Bootloader - Starting system.
flash is writable
Tide XL MB - 40MB of flash
Xmodem file system is available.
flashfs[0]: 15 files, 2 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 41158656
flashfs[0]: Bytes used: 6159872
flashfs[0]: Bytes available: 34998784
flashfs[0]: flashfs fsck took 10 seconds.
Base Ethernet MAC address: ec:bd:1d:a4:20:08
Ethernet speed is 100 Mb - FULL Duplex
Loading "flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-mx"...#########################

File "flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-mx" uncompressed and installed, entr y point: 0x2003000
executing...

Secondary Bootloader - Starting system.
Montserrat Board
40MB format
Tide XL MB - 40MB of flash
Xmodem file system is available.
flashfs[0]: 15 files, 2 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 41158656
flashfs[0]: Bytes used: 6159872
flashfs[0]: Bytes available: 34998784
flashfs[0]: flashfs fsck took 10 seconds.
flashfs[1]: 0 files, 1 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 12257280
flashfs[1]: Bytes used: 1024
flashfs[1]: Bytes available: 12256256
flashfs[1]: flashfs fsck took 0 seconds.
Base Ethernet MAC address: ec:bd:1d:a4:20:08
Unable to locate IOS image with name **xx**.
Boot CMD: 'boot flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-xx'
Loading "flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-xx"...########################
File "flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-xx" uncompressed and installed, entry point: 0x1003000
executing...

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Cisco IOS Software, C3700 Software (AP3G2-RCVK9W8-M), Version 15.3(3)JA3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Thu 19-Feb-15 10:27 by prod_rel_team

Montserrat Board
40MB format
Tide XL MB - 40MB of flash
Initializing flashfs...

flashfs[2]: 15 files, 2 directories
flashfs[2]: 0 orphaned files, 0 orphaned directories
flashfs[2]: Total bytes: 40900608
flashfs[2]: Bytes used: 6159872
flashfs[2]: Bytes available: 34740736
flashfs[2]: flashfs fsck took 11 seconds.
flashfs[2]: Initialization complete.
flashfs[3]: 0 files, 1 directories
flashfs[3]: 0 orphaned files, 0 orphaned directories
flashfs[3]: Total bytes: 11999232
flashfs[3]: Bytes used: 1024
flashfs[3]: Bytes available: 11998208
flashfs[3]: flashfs fsck took 0 seconds.
flashfs[3]: Initialization complete....done Initializing flashfs.

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco AIR-CAP3702E-E-K9 (PowerPC) processor (revision A0) with 376810K/134656K bytes of memory.
Processor board ID FCZ1937Y0HH
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
LWAPP image version 8.0.115.0
1 Gigabit Ethernet interface

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: EC:BD:1D:A4:20:08
Part Number : 73-15397-01
PCA Assembly Number : 000-00000-00
PCA Revision Number :
PCB Serial Number : FOC19324D9H
Top Assembly Part Number : 068-05055-06
Top Assembly Serial Number : FCZ1937Y0HH
Top Revision Number : A0
Product/Model Number : AIR-CAP3702E-E-K9
% Please define a domain-name first.
ipv6 enable
^
% Invalid input detected at '^' marker.

ipv6 address autoconfig
^
% Invalid input detected at '^' marker.

ipv6 address dhcp
^
% Invalid input detected at '^' marker.

Press RETURN to get started!

*Mar 1 00:00:13.083: APAVC: Initial WLAN Buffers Given to System is 2500

*Mar 1 00:00:13.131: APAVC: WlanPAKs 42878 RadioPaks 42270

*Mar 1 00:00:13.139: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. Initialising Cfg

*Mar 1 00:00:15.199: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:15.335: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3700 Software (AP3G2-RCVK9W8-M), Version 15.3(3)JA3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Thu 19-Feb-15 10:27 by prod_rel_team
*Mar 1 00:00:15.515: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. Initialising Cfg
lwapp_crypto_init: MIC Present and Parsed Successfully

*Mar 1 00:00:15.659: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:00:16.431: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 00:00:20.315: DPAA Initialization Complete
*Mar 1 00:00:20.315: %SYS-3-HARIKARI: Process DPAA INIT top-level routine exited
*Mar 1 00:00:21.315: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:23.315: %LINK-6-UPDOWN: Interface BVI1, changed state to down
*Mar 1 00:00:24.315: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to down
*Mar 1 00:00:27.435: %LINK-6-UPDOWN: Interface BVI1, changed state to up
*Mar 1 00:00:28.435: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 00:00:30.811: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 192.168.1.22, mask 255.255.255.0, hostname APecbd.1da4.2008
%Default route without gateway, if not a point-to-point interface, may impact performance
*Mar 1 00:00:34.203: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. Initialising Cfg

%Error opening flash:/capwap-saved-config (No such file or directory)
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (192.168.1.1)

[Tomas82]

is it possible to send me the firmware to my email? and is possible to fix my ap via teamviewer ? thank you!

[Tomas82]

ap: tar -xtract tftp://192.168.1.17/ap3g2-k9w7-tar.152-4.JB3a.tar flash

extracting info (289 bytes)flash/info: permission denied

:(