Polling information from Meraki MR34 through SNMP

[Cristian Mena]

Hello everyone. I need your help. How can i poll information of a Meraki MR34-HW through SNMP. I know that with the meraki cloud manager i can pull all the data like the SSID, number of clients on the wifi and so, but i need to poll than information through SNMP. I need to know wich MIB files the MR34 have in order to install them on my server and make the polling. Hope you can help me. Thanks !

[Scott Fella]

Here is a link to Meraki’s guide for their snmp polling overview. This should get you the OIDs to start from.
https://documentation.meraki.com/zGeneral_Administration/Monitoring_and_Reporting/SNMP_Overview_and_Configuration

[Cristian Mena]

Thanks for the sugestion. I already tried that. Meraki Cloud offers all the information that i need, but i would like to polll that information myself through snmp with an ssh client but i can't find a way to do it yet. i don't know if there's another mib or oid that i've missed. 

[Scott Fella]

The doc shows the OIDs to poll directly from the access point. It’s the only OIDs they allow. If your looking for something other than what they allow, then most likely you will not be able to poll that information.

[Cristian Mena]

I read the IF-MIB. SNMPV2 and the MERAKI-CLOUD-CONTROLLER-MIB files but they don't say anything about polling the specific information that Cloud Meraki shows. That's the part that i'm missing.  

[Scott Fella]

Have you tried to perform an snmp walk to the Meraki device itself? The document states that the MIBs are the same for the dashboard and or the device.