03-02-2016 09:17 AM - edited 07-05-2021 04:42 AM
Hi,
I am putting together a BOM for a customer.
They require 1830 APs with Power Injectors.
I failed to find any power injectors on cisco.com
Doesn't Cisco manufacture any ? If no, is there a recommended brand ?
Thanks in advance !
Solved! Go to Solution.
03-03-2016 12:37 AM
Doesn't Cisco manufacture any ? If no, is there a recommended brand ?
AIR-PWRINJ4 will support 1830. Power draw is for the 1830 is 16.0w and AIR-PWRINJ4 can support up to 20.0w.
Cisco doesn't manufacture the injectors. The manufacturer of the Cisco-branded power injectors is Phihong USA.
03-02-2016 05:32 PM
Powering options |
● 802.3af/802.3at
● Enhanced PoE
● Cisco local power supply, AIR-PWR-C=
● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports 802.3af only)
Note: If 802.3af PoE is the source of power, the USB port is disabled. |
03-03-2016 12:40 AM
"Note: This injector supports 802.3af only"
We want to use all features of 1830, hence 802.3at
03-03-2016 12:37 AM
Doesn't Cisco manufacture any ? If no, is there a recommended brand ?
AIR-PWRINJ4 will support 1830. Power draw is for the 1830 is 16.0w and AIR-PWRINJ4 can support up to 20.0w.
Cisco doesn't manufacture the injectors. The manufacturer of the Cisco-branded power injectors is Phihong USA.
03-03-2016 12:37 AM
Thanks for the info.
http://www.broadbandbuyer.co.uk/products/18401-cisco-air-pwrinj4=/specifications/
Here it says 15W, not 20W. Will you please share, where did you look for the specs of AIR-PWRINJ4 ?
Thanks
03-03-2016 12:06 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide