09-07-2012 03:11 PM - edited 07-03-2021 10:38 PM
Hello
I configured a 2504 controller with two LWAPP Access Points, and I'm using two SSID's on the same controller, the problem is when the user tries to switch between SSID's he gets an error message saying that the other network is unavailable but if he disconnects from the first network and then connects to the other it works fine !.
My user ask me to solve this issue, do you have something like this reported ?
Regards
Solved! Go to Solution.
09-07-2012 03:13 PM
On the Controller tab, make sure Fast SSID Change is enabled.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
09-12-2012 03:16 PM
That should work... let us know if it doesn't.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
09-07-2012 03:13 PM
On the Controller tab, make sure Fast SSID Change is enabled.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
09-07-2012 03:26 PM
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
09-12-2012 03:00 PM
Thank you very much Scott, I'll try it.
Regards
09-12-2012 03:16 PM
That should work... let us know if it doesn't.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
09-25-2012 09:22 AM
Scott
THANK YOU
You are right, that worked just fine. Thanks a lot !
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide