Hello
I configured a 2504 controller with two LWAPP Access Points, and I'm using two SSID's on the same controller, the problem is when the user tries to switch between SSID's he gets an error message saying that the other network is unavailable but if he disconnects from the first network and then connects to the other it works fine !.
My user ask me to solve this issue, do you have something like this reported ?
Regards
Solved! Go to Solution.
On the Controller tab, make sure Fast SSID Change is enabled.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
That should work... let us know if it doesn't.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
On the Controller tab, make sure Fast SSID Change is enabled.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
Thank you very much Scott, I'll try it.
Regards
That should work... let us know if it doesn't.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
Scott
THANK YOU
You are right, that worked just fine. Thanks a lot !