Problem with Aironet 350 Bridge

[francisco.custodio]

Hi!

I'm configuring some wireless links using 350 bridges. Every link is working good, but I have one link between 2 350's that is not working. The antennas are in line of site and the 2 bridges are configured the same away...running the same ios code. I'm getting this message "Cannot support all the requested capabilities" when the bridges try to associate.

Any help is welcomed!

Cheers!

[kmarrero]

Make sure you have one of the bridges set up as ROOT Bridge and one as NON-ROOT bridge. If you have one set up as ROOT AP and the other as NON-ROOT bridge, they will not talk. Take a look at the roles in radio network to further clarify the settings.

http://www.cisco.com/en/US/products/hw/wireless/ps458/products_configuration_guide_chapter09186a008007f77f.html#1016921