Problem with WLC 5508 Roaming with iPhone

[armando.barrera]

First of all greetings to all in the community.

The problem I am running is in the roaming phones mainly iphone, which I have them in a SSID also serves to data connection of other devices which has the following security policy [WPA + WPA2] [Auth (802.1x )]

WLC: 7.0.98.0

iphone: V6.0 OS

jabber: v9.02.20078

For DCA parameters were configured channels 1,6 and 11. I'm testing with a floor where there are 2 APs and AP normal users are 10 to 13 connected devices, also reviewed in each AP channel where an AP is on channel 1 and the other is in the channel 6.

I was able to capture the following errors in the APs.

Exhibits some show on catches.

Appreciating your valuable help, I say goodbye

[Jaffar Nassiry]

Hi Armando,

Refrence this bug:

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCta91836

Also recommend upgrading your 5508s firmware

[Leo Laohoo]

[WPA + WPA2]

iPhones don't like choices.  You either run WPA or WPA2.  Don't try to run both and presume the iDevice can decide because they won't.