01-03-2012 08:37 AM - edited 07-03-2021 09:19 PM
I have a Cisco WLC 5508, and it crashed, and this is the message of the crash:
"Analysis of Failure:
Software was stopped by the reaper for the following reason:
Reaper Reset: Task "apfMsConnTask_4" taking too much cpu: 100% (user 18%, system 81%) while SW Watchdog is disabled"
Do you know what means this message?
Versio IOS:
7.0.98.0
01-03-2012 08:43 AM
Hi Jorge,
I am not fimilar with that specific error message. But I do know, if you call TAC and tell them you are on 7.0.98.0 they will tell you to move to 7.0.220.0.
7.0.98.0 is a bit buggy.
01-03-2012 11:00 AM
Basically, it is telling you that the Reaper task had to kill a process becuase it was taking up too much of the resources. And it caused the box to crash.
But as George said, you'll want to upgrade to 7.0.220.0, as 98 is buggy.
HTH,
Steve
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide