Pulling DHCP from location server

[DialerString_2]

Hello all,

I have roughly 26 locations on different subnet and each location has a DHCP server that I would like to use.

The WLC is broadcasting two ssid's (internal and guest). I need for the wifi clients to pull there ip addy's  from the location dhcp severs. Is this possible considering I only have two ssids mapped to two interfaces? Each location has it's on DHCP server that I would like to use. Thanks!

[Stephen Rodriguez]

For that to work, you would need to configure the remote AP for HREAP.  With HREAP Local Switching, the DHCP request is bridged to the wire, and will pull DHCP from whichever VLAN scope you have configured.  Below is a link to the Design and Deployment guide.

http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080736123.shtml

HTH,

Steve

[DialerString_2]

Stephen thanks for your reply and I will make the changes tonight. I will post back to the forum with my results. Thanks!!!