PWRINJ-FIB

[v-ortiz]

HOLA!

Alguien tiene información respecto a si este power injector puede operar con AP´s 1600 y 3500?

sl2

[Stephen Rodriguez]

Below is the data sheet for the 3500.  The PWRING-FIB is not listed as a power source for the device.

  http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps10981/data_sheet_c78-594630.html

• 802.3af Ethernet Switch

• Cisco AP3500 Power Injectors (AIR-PWRINJ4=)

• Cisco AP3500 Local Power Supply (AIR-PWR-B=)

From the data sheet for the PWRING-FIB it's for use with the 1100/1130/1200/1242 series of AP.

HTH,

Steve

[v-ortiz]

ok, i don´t it as a power source, i need it for extended the conectivite more than 100 mts... but I see thar PWRING-FIB is not operating with 1600 and 3500 AP´s, right?

can i use fiber optic with transiver? what are the implications?

Best regards

VO

[Stephen Rodriguez]

it might work.  But you woudl be limitiing the AP to 100M, instead of 1G.

[v-ortiz]

Hi!

are there some accesories lide PWRINJ-FIB that is compatible withc AP's 3500 and 1640?

tnks

[Leo Laohoo]

 i need it for extended the conectivite more than 100 mts

A PWR-INJ is not an ethernet extender.  If your cabling is more than 100 metres then there goes your 100 or 1000 Mbps.  You'll have to operate your WAP at 10 Mbps.  If that is the case, why bother putting a WAP in the first place?  You'll get more complaints about slow responses than compliments.