cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
478
Views
0
Helpful
1
Replies

Queue full discards

llazarevic
Level 1
Level 1

Hi, does anyone know what it means the following WGB error:

E Radio Error: 11 Queue full discards

E Radio Error: 9 Queue full discards

E Radio Error: 7 Queue full discards

E Radio Error: 6 Queue full discards

After this error WGB lost connection with Bridge in AP mode. I must to restart WGB and the link is OK. Does anyone have experience with this error on WGB? Or how to solve this problem?

Best Regards,

Jovan.

1 Reply 1

kmarrero
Level 4
Level 4

This error message means that there is either too much traffic on your network or that you are overlapping your RF with someone else. If you have too much traffic on your network, then you will have to fix that issue. If you do not have a lot of traffic, then you will want to use non-overlapping channels to resolve the issue. Non-overlapping channels are 1, 6 and 11.

Review Cisco Networking for a $25 gift card