REP on Wireless

[gjelke]

I have a client needing to have a segment of the REP ring being wireless p2p link. Perhaps even more than one.

I can find documentation of what is supported, is it safe to assume that all other variations are then not supported?

[pieterh]

Supported Platforms

• Desktop Switching Business Unit (DSBU) Metro Switches (3750ME and ME3400) Release 12.2(40)SE and later
• Cisco Catalyst 4500 Series Switch Release 12.2(44)SG and later
• Cisco Catalyst 6500 Series Switch Starting in Whitney2 (12.2SXI)
• Cisco Catalyst 7600 Series Router Starting in Cobra (12.2SRC)

source: https://www.cisco.com/c/en/us/support/docs/lan-switching/ethernet/116384-technote-rep-00.html 

 of course as it is a L2 protocol, it might work over wireless links that transparently forward L2 packets.
but  I would read info in above document as not supported on other devices than above mentioned

added: more supported devices
https://www.cisco.com/c/en/us/support/docs/switches/catalyst-9300-series-switches/220717-understand-rep-on-catalyst-9000-switches.html

Components Used

The information in this document is based on these software and hardware versions:

• Catalyst 9200
• Catalyst 9300
• Catalyst 9400
• Catalyst 9500
• Catalyst 9600
• Cisco IOS XE 17.6.5 and later