RF Coverage
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-13-2005 06:48 AM - edited 07-04-2021 10:53 AM
We own a big warehouse dim 180 (L)X 50 (H)X 120 (W) cubic ft.
[1] we need to provide RF coverage inside and outside of warehouse. Therfore, please suggest me a Cisco "Dual Radio Access Point" and its Part Number.
[2]Though we know that Cisco Access Points and Antennas comes with RP -TNC type connectors.
I would like to know if we can connect Cisco Access Point and Antenna using LMR 900 (Timesmicrowave)RF cable which has N-Type male connector.
[3] If answer to [2] is yes, please provide me the adapter with its Part Number please.
Your urgent reply shall be appreciated.
Thank you,
Regards
- Labels:
-
Wireless LAN Controller
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-17-2005 06:52 AM
Cisco Aironet 1200 Series Access Point has dual antenna option.
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_data_sheet09186a00800937a6.html
Cisco does not offer LMR-400 or LMR-600 cable with N-Type connectors to extend the distance from the ODU to the antenna beyond the 4.9 ft (1.5 meter) pigtail distance, but these are readily available from third-party sources. Although you can use the longer cable, losses are associated with it. Use the outdoor range calculator to determine the loss per foot of this cable for EIRP values.
