08-05-2024 09:21 PM
Does the Rogue Detection Minimum RSSI feature work with wIPS as well?
Suppose I set the Rogue Detection Minimum RSSI to -80. This means that the AP will detect rogue with a signal strength higher than -80 and will display it on the WLC.
Does this value affect wIPS as well? Let's say an attacker tries Disassociation / Deauthentication Flood at -85 range on WLC, will it be visible?
Solved! Go to Solution.
08-09-2024 05:42 PM
I have tested and concluded that if the Rogue Detection Minimum RSSI is set to -80
The AP will detect rogues with signal strength higher than -80 and will display them on the WLC.
Simulates an attacker in position -85 and sends DeAuth. AP can detect and send DeAuth information to display on aWIPS on WLC.
08-09-2024 05:42 PM
I have tested and concluded that if the Rogue Detection Minimum RSSI is set to -80
The AP will detect rogues with signal strength higher than -80 and will display them on the WLC.
Simulates an attacker in position -85 and sends DeAuth. AP can detect and send DeAuth information to display on aWIPS on WLC.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide