I try to change ip address of AP MR 36 it can not go online if i assign new ip address when i try to remove MX64 from network it is go online with new IP address ,i can ping it’s ip address but it can not go to the internet .the limit license = Curre...
Forum Posts
Well, kind of ... https://www.cisco.com/c/en/us/products/collateral/wireless/catalyst-9100ax-access-points/wireless-9172-series-access-points-ds.htmlFor general use, I still hope for a 9174I.
Resolved! Open Guest SSID transition to WiFi 7
We currently have an Open SSID for guests. My understanding is that OWE will only work for clients that support WiFi 7, which unfortunately isn't feasible in our environment. The alternative is to switch it from Open to PSK, and then enabling WPA3 tr...
Hello team,What would be the reason for high 5ghz utilization in cisco 9130 AP and how to mitigate it?also the number of user is as per the recommendations?Regards,Anjana
Hi All, Have raised this before but it never got a proper answer, so I waited abit and raised once more. Our Meraki LAN wifi users are currently authenticating using Radius Servers configuration and we are trying to move out from it. I did raise a TA...
Hello Team,ipad is connected to one particular ssid and got the ippaddress.The requirement is tp ping the printer ip address from the ipad.>> have tested the other devices which are connected to same ssid tested peer to peer pinging and it is working...
Resolved! laptop sticky behaviour
Hello team,The laptop is on the latest driver 23.60 or 23.90 but always shows the sticky behaviour always connects to 2.4ghz over 5Ghz and the laptop os is windows 10/11.What would be reason for the sticky behaviour.Anjana
Hola a Todos/as!!Quisiera consultarles si pueden darme una mano con este tema.Tengo un WLC 5520 Version 8.2.151.0 en donde no puedo configurar las potencias de las antenas en mas de 12 (que multiplicado por 0.5 me da 6) cuando estas antenas son de 13...
I have purchased a new Cisco MR44 device. It was added to another network once but was later removed from there. Now, while adding the device to a new organization, it is showing as "already in use." How can I whitelist it? I have also reset it, but ...
GREETINGS all,We suddenly have an issue that guest user cannot complete the guest portal authentication because the browser cannot pop up.From the ISE live log:device authentication successful;device get the configured IP address (a guest VLAN);dev...
- FYI : https://documentation.meraki.com/MR/MR_Overview_and_Specifications/CW9178_Datasheet https://documentation.meraki.com/MR/MR_Overview_and_Specifications/CW9176I_%2F%2F_CW9176D1_Datasheet M.
Hello, I'm trying to verify my WLC9800 controller configurations because I'm having an weird issue.Here's the thing: - SSID: CORP (WLAN setup with L2 auth, Macfiltering from WLC9800 (local) - SSID: GUEST (WLAN setup with L3 auth (guest portal), id/pa...
my WLC located in Datacenter and AP located in branch office. The AP using flex connect so the client will get ip from local switch in branch office. With flex connect scenario is the data interface on WLC will be used, or flex connect only need conn...
Hoping someone in the educational sector may know of a way to do this: We have a list of URLs for which we'd like to require permission by a school adult to students that attempt to access. Example, a student tries going to youtube.com, he/she gets a...
Hi all,Is it possible to pull a report on logins that have used the Sponsored Splash Login?I am aware that I am able to see the details I required [Who authorised the login and expiry] on a per client basis.But that is quite a slow and painful way to...
