Hi All-
Playing around setting up Mobility Express on an old 2802. The AP side seems fine, it comes up, gets an IP address and is pingable. I cannot get connectivity to the controller side.
The switch port looks like this:
interface GigabitEthernet1/0/13
description Ap Port
switchport trunk allowed vlan 100,102,104
switchport trunk encapsulation dot1q
switchport trunk native vlan 102
switchport mode trunk
Controller interfaces:
(Cisco Controller) >show interface summary
Number of Interfaces.......................... 2
Interface Name Port Vlan Id IP Address Type Ap Mgr Guest
-------------------------------- ---- -------- --------------- ------- ------ -----
management 1 102 10.175.252.14 Static Yes N/A
virtual N/A N/A 192.0.2.1 Static No N/A
(Cisco Controller) >show interface detailed management
Interface Name................................... management
MAC Address...................................... 00:00:5e:00:01:01
IP Address....................................... 10.175.252.14
IP Netmask....................................... 255.255.255.0
IP Gateway....................................... 10.175.252.10
IP Address Type.................................. Static
External NAT IP State............................ Disabled
External NAT IP Address.......................... 0.0.0.0
Link Local IPv6 Address.......................... fe80::12b3:d5ff:fef1:8fe0/64
STATE ........................................... NONE
Primary IPv6 Address............................. ::/128
STATE ........................................... NONE
Primary IPv6 Gateway............................. ::
Primary IPv6 Gateway Mac Address................. 00:00:00:00:00:00
STATE ........................................... CREATING
VLAN............................................. 102
Quarantine-vlan.................................. 0
Physical Port.................................... 1
DHCP Proxy Mode.................................. Global
Primary DHCP Server.............................. Unconfigured
Secondary DHCP Server............................ Unconfigured
DHCP Option 82................................... Disabled
DHCP Option 82 bridge mode insertion............. Disabled
DHCP Option 6 Opendns Override................... Disabled
IPv4 ACL......................................... Unconfigured
IPv6 ACL......................................... Unconfigured
mDNS Profile Name................................ Unconfigured
AP Manager....................................... Yes
Guest Interface.................................. N/A
L2 Multicast..................................... Enabled
The controller can't ping itself or the gateway:
(Cisco Controller) >ping 10.175.252.14
Send count=3, Receive count=0 from 10.175.252.14
(Cisco Controller) >ping 10.175.252.10
Send count=3, Receive count=0 from 10.175.252.10
Software is this:
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 8.10.185.0
OUI File Last Update Time........................ N/A
System Name...................................... c2802-ME-1
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.2370
IP Address....................................... 10.175.252.14
Last Reset....................................... 1: reload command
System Up Time................................... 0 days 0 hrs 49 mins 26 secs
System Timezone Location......................... (GMT -6:00) Central Time (US and Canada)
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180
Configured Country............................... US - United States
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 1
Number of Active Clients......................... 0
OUI Classification Failure Count................. 0
Memory Current Usage............................. 74
Memory Average Usage............................. 74
CPU Current Usage................................ 2
CPU Average Usage................................ 2
Flash Type....................................... Compact Flash Card
Flash Size....................................... 1073741824
Burned-in MAC Address............................ 10:B3:D5:F1:8F:E0
Maximum number of APs supported.................. 100
System Nas-Id....................................
WLC MIC Certificate Types........................ SHA1/SHA2
I don't understand why I don't have connectivity. Any advise would be appreciated!
